FUTABA 4YF-FM 4-Channel Digital Proportional R/C System (For Airplane Models)
FEATURES: All-channel servo reversing for more installation options; Transmitter and receiver NiCds made from genuine Sanyo cells can be recharged simultaneously with the included 50A overnight charger; Power and servo reversing switches are located down and out of the way for convenience and to avoid accidental changes; The battery meter features one green and one red LED for easy-to-read go/no go status. Dual conversion R127DF narrow-band FM receiver; Ball bearing servos for smoother operation than standard servos; Spring loaded trainer toggle switch for instant "off"; Gimbals have knurled tops for a better "feel" on the sticks and to prevent finger slippage. One year limited warranty INCLUDES: One Futaba 4YF 4-channel FM radio system with NiCd batteries, charger, frequency flags, neck strap, servo tray, switch harness, four S3004 servos, and servo mounting hardware. REQUIRES: Charging batteries overnight SPECS: Transmitter: Modulation Method: FM (frequency modulation) Power Requirement: 9.6V NiCD battery Curent Drain: 180mA R127DF Receiver: (FUTL0702, FUTL0703, FUTL0704) Narrow Band: 20kHz Intermediate Frequency- 1st IF: 10.7MHz 2nd IF: 455kHz Power Requirements: 4.8 to 6.0 volts (shared with servos) Current Drain: 10mA Length: 2.52" (64.3mm) Width: 1.39" (35.8mm) Height: 0.82" (21.0mm) Weight: 1.5oz (40.5g) Charger: FBC-8B(4) (FUTM1800) Input: 120V AC 60Hz 4W Output: TX 9.6VDC 50mA RX 4.8VDC 50mA TX battery: 600mah (FUTM1440) RX battery :600mah (FUTM1295) Bands: 72,75mHz S3004 Ball Bearing Servo-FUTM0004 Speed: 0.23 sec/60 degrees at 4.8V 0.19 sec/60 degrees at 6.0V Torque: 44.3 ounces-inches (3.2kg-cm) at 4.8V 56.8 ounces-inches (4.1kg-cm) at 6.0V Length: 1.59" (40.4mm) Width: 0.78" (19.8mm) Height: 1.42" (36mm) Weight: 1.30 ounce (38 grams) Connector: "J" type with approx. 5" wire |
