Tamiya GT-Tuned Motor II (25T) #22096
Tamiya GT-Tuned Motor II (25T) #22096.
Right-sized motor for 1/10 touring and club racing The Tamiya 22096 GT-Tuned Motor II (25T) is an electric motor option for 1/10-scale touring cars and compatible chassis. Its 25T tooth count is a practical identifier when matching pinion and spur gears during a gearing change. The following points cover fitment considerations, installation checks, and setup tips for hobbyists tuning their powertrains. Before you fit this motor, confirm the motor mount alignment and check the pinion-to-spur mesh to avoid premature gear damage. It uses the typical 1/10 motor mount layout found on many touring platforms; make sure the motor shaft and pinion spline are compatible, and replace the pinion if the spline or tooth count differs. Compatibility: 1/10-scale electric RC cars and compatible touring chassis Use case: replacement motor or tuning swap to change gearing Installation note: set correct gear mesh, tighten set-screws properly, and verify ESC/battery match Maintenance tip: inspect pinion teeth and commutator or brush area after initial runs |
